PORT HARCOURT REFINING COMPANY
Last update 5 months ago
Energy | Oil & Gas
Workforce 3 - 50 employees
+234 84 777 848 | +234 84 766 951Email - Website http://nnpcgroup.com/NNPCBusiness/Subsidiaries/PHRC.aspx
NIGERIAN NATIONAL PETROLEUM CORPORATION
The Port Harcourt Refining Company Limited is in business to optimally process hydrocarbon into petroleum products for the benefit of all stakeholders. The company’s vision is to be an innovative international hydrocarbon processing company of choice.
PHRC Limited is made up of two refineries. The old refinery commissioned in 1965 with current nameplate capacity of 60,000 barrels per stream day (bpsd) and the new refinery commissioned in 1989 with an installed capacity of 150,000 bpsd This brings the combined crude processing capacity of the Port Harcourt Refinery to 210,000 bpsd. It has five (5) process areas - Areas 1-5. The new refinery is made up of Areas 1-4 while the old refinery is Area 5.
Area 1 is made up of the Crude Distillation Unit (CDU), where kerosene and Automotive Gas oil (AGO) are produced as finished products. Other intermediate products from CDU are Straight –Run Naphta (SRN). Straight Run Gasoline (SRG) used for PMS blend, Liquefied Petroleum Gas (LPG) and Atmospheric residue (AR). Vacuum Distillation Unit (VDU) where AR (CDU bottoms) are further processed under vacuum, or significantly less than atmospheric pressure to produce high –vallue products without cracking like vacuum gas oil (VGO) fccu feedstock and light as gas oil.
Area 2 is made up of Naphtha Hydrotreatung unit (NHU), where naphtha is hydro-desulphurised; the Catalytic Reforming Unit (CRU), responsible for upgrading naphtha to reformate which has a higher octane value for PMS blend; the kero Hydrotreating Unit (KHU) where kero is treated to make it acceptable for aviation use: Area 2 also has the Continuous Catalyst Regeneration Unit (CCR), which constantly reactivates the deactivated catalyst from the reformer. Other units in Area 2 include, the Hydrogen Purification, Fuel Gas Vaporizer, Sour Water Treatment and Caustic Treatment units.
Area 3 is made up of a Fluid Catalytic Cracking Unit (FCCU), where Vacuum Gas Oil (VGO) and heavy diesel oil (HDO) are cracked to obtain more valuable products, like FCC gasoline used as pms blend and Light Cycle as blend component for LPFO and LPG. Other units in Area 3 include the Gas Concentration, Gas Treating and Mercaptan Oxidation units.
Area 4 has three process units namely Dimersol, Butamer Isomerisation and Alkylation units. The units are designed to produce high octane gasoline blend component.
Area 5, which is the old refinery, is made up of the Crude Distillation Unit (CDU); the Platform Unit (CRU), the LPG Unit, as well as utilities section.
The refinery is self sufficient in power and utilities generated from the Power Plant & Utilities. There are four (4) turbo-generators each with a capacity of 14MW of electricity per hour and four (4) Boilers, capable of generating 120 tons of steam per hour each. The section also generates cooling/service water, plant/instrument air and nitrogen.
The refinery has a pool of maintenance personnel that take care of routine, programmed and emergency repairs of equipment.
There is also the Supply Chain Management Department that oversees the procurement and storage of needed spare parts and chemicals.
M... S...Managing Director
Effective 5 months ago
V... U...Executive Director, Operations
R... U...Executive Director, Services
Left the company less than a year ago
B... E...Managing Director
Left 6 months ago